Features

Energy efficiency class in heating medium climate up to: A+++ (35°C) e A++ (55°C)

Available powers: 4 powers with R32 refrigerant: 4-6-8-10 kW single-phase and 3 powers with R410A refrigerant: 12-14-16 kW single-phase and three-phase

DHW (Domestic Hot Water) production at a high temperature, up to 75 ° C.

DHW management: a group of water-water heat pumps integrated in the indoor unit provides domestic hot water at a high temperature regardless of external weather conditions.

Continuous absolute availablity of DHW: guaranteed by the redundance of the double refrigerating circuit system.

Antilegionella cycles avoidable using the refrigeration cycle at high temperature. 2-stage electric heater: single or double strength activation to support the heat pump through a simple configuration of the electronic control. Each stage is activated according to the actual need of thermal power in order to optimize power consumption.

Configurable points: two set points in cooling mode Three set points in heating mode (one of them for DHW): the set points are also selectable
by remote contact.

Weekly programmer DHW, holidays and daily with night mode.

Climatic curves with outside air temperature sensor: two curves are available, one for cooling and one for heating. Climatic curves allow you to modify system water temperature supply depending on climate conditions, adapting the heat requirements of the building in order to obtain
energy savings.

Refrigerant gas: R32* or R410A* for the reversible circuit dedicated to air-conditioning and R134a** for the high temperature circuit dedicated to DHW
production.

* Non hermetically sealed equipment containing fluorinated gas with GWP equivalent of 675 (R32) and 2088 (R410A)
** Non hermetically sealed equipment containing fluorinated gas with GWP equivalent 1430