Air-water heat pump that can manage the year-round climate. It does not burn any fossil fuel: it captures the energy in the air and multiplies it. Every kW, produces more than 4 thermal energy: 75% of the energy is free, renewable and clean.
Inverter air-water heat pump
Energy efficiency class in average climate heating up to: A+++ (35°C)
and A++ (55°C)
Powers available: 4 Powers with refrigerant R32: 4-6-8-10 kW singlephase
and 3 Powers with refrigerant R410A: 12-14-16 kW single-phase and
three-phase
Supplies DHW with temperature up to 60° C.
DHW management: Sherpa is used to manage Domestic Hot Water
with extreme flexibility through two management modes: water probe
inserted in the storage tank or thermostat contact of the storage tank.
Climatic curves based on the external air temperature:
two curves available, one for cooling and one for heating.
The climatic curves allow the temperature of the system to be varied
according to the external climatic conditions, adjusting the heat input to
the building’s thermal needs, in order to obtain energy savings.
Two configurable cooling set points, Three set points configurable in
heating mode (one of which for DHW): the set points can also be selected
from a remote contact.
Standard double-stage electric heating elements: configurable as single
or double-stage can be activated to support the heat pump, with checking,
via the electronic control, of the actual thermal output of the heat pump.
Each stage is activated according to the actual need for thermal power, in
order to optimise electricity consumption.
Daily holiday and weekly programmer: heating/cooling, DHW, night..
Complete management of anti-legionella cycles
R32* or R410A* refrigerant gas
* Non hermetically sealed equipment containing fluorinated gas with GWP equivalent to 675 (R32) and 2088 (R410A)
